Comment on page
Hardware installation
Follow these steps to install the MRE hardware

Mago Room Essential powered by MeLE Fanless Mini PC
- 1.Unbox your Mago Room Essential IoT device
- 2.Connect all the cables properly, based on your environment as follows (A, B or C):

MRE Connection Schema - Passive display
- 1.Power cable with EU / UK / US socket
- 2.HDMI cable from the device HDMI output to the passive display HDMI input
Case B) Interactive display

MRE Connection Schema - Interactive display
- 1.Power cable with EU / UK / US socket
- 2.HDMI cable from the device HDMI output to the interactive display HDMI input
- 3.USB-C or USB-A cable from the device output to the interactive display input for touch control

MRE Connection Schema - UCC room device
- 1.Power cable with EU / UK / US socket
- 2.HDMI cable from the device HDMI output to the UCC device or controller HDMI input (ingest)
- 3.Connection cable from the device or controller output to the display input
- 3.Connect the device via Ethernet cable (or skip if you are using WiFi for the internet connection)
Ethernet connection is strongly recommended for a better experience
- 4.Connect a keyboard and mouse (case A and C)
- 5.Install the device on the wall using the special brackets contained in the package, or place it behind the display or on the table
Last modified 8d ago