> For the complete documentation index, see [llms.txt](https://kb.mago.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://kb.mago.io/mago-essential/setup-guide/hardware-installation/optional-setting-up-hdmi-capture-for-wired-screen-sharing.md).

# (Optional) Setting Up HDMI Capture for Wired Screen Sharing

To enable the HDMI input capabilities of Mago Essential for wired screen sharing, you need to use a certified HDMI capture card. Follow these steps:

1. **Obtain a Certified Capture Card**
   * Ensure you have a certified capture card that supports HDMI input, such as the INOGENI 4K2USB3 USB 3.0 Capture Card or any other approved models from the supported list.
2. **Connect the Capture Card**
   * Plug the HDMI capture card into one of the available USB or USB-C ports on the Mago Essential device.
   * Ensure the card is securely connected and recognized by the device.
3. **Connect HDMI Cable**
   * Take an HDMI 2.0+ cable and connect one end to the HDMI output of the Mago Essential device.
   * Route the other end of the cable to the designated location in the room, such as a table or another area where users will have access to it.
4. **Next Steps**\
   The software configuration for HDMI input and screen sharing will be detailed in the First

   Configuration section of this guide.